NAME

barman - Backup and Recovery Manager for PostgreSQL

DESCRIPTION

Barman is an administration tool for disaster recovery of PostgreSQL servers written in Python and maintained by 2ndQuadrant. Barman can perform remote backups of multiple servers in business critical environments and helps DBAs during the recovery phase.

CONFIGURATION FILE LOCATIONS

The system-level Barman configuration file is located at

/etc/barman.conf

or

/etc/barman/barman.conf

and is overridden on a per-user level by

$HOME/.barman.conf

CONFIGURATION FILE SYNTAX

The Barman configuration file is a plain INI file. There is a general section called [barman] and a section [servername] for each server you want to backup. Rows starting with ; are comments.

CONFIGURATION FILE DIRECTORY

Barman supports the inclusion of multiple configuration files, through the configuration_files_directory option. Included files must contain only server specifications, not global configurations. If the value of configuration_files_directory is a directory, Barman reads all files with .conf extension that exist in that folder. For example, if you set it to /etc/barman.d, you can specify your PostgreSQL servers placing each section in a separate .conf file inside the /etc/barman.d folder.

OPTIONS

active

When set to true (default), the server is in full operational state. When set to false, the server can be used for diagnostics, but any operational command such as backup execution or WAL archiving is temporarily disabled. Setting active=false is a good practice when adding a new node to Barman. Server.

archiver

This option allows you to activate log file shipping through PostgreSQL’s archive_command for a server. If set to true (default), Barman expects that continuous archiving for a server is in place and will activate checks as well as management (including compression) of WAL files that Postgres deposits in the incoming directory. Setting it to false, will disable standard continuous archiving for a server. Global/Server.

archiver_batch_size

This option allows you to activate batch processing of WAL files for the archiver process, by setting it to a value > 0. Otherwise, the traditional unlimited processing of the WAL queue is enabled. When batch processing is activated, the archive-wal process would limit itself to maximum archiver_batch_size WAL segments per single run. Integer. Global/Server.

backup_directory

Directory where backup data for a server will be placed. Server.

backup_method

Configure the method barman used for backup execution. If set to rsync (default), barman will execute backup using the rsync command. If set to postgres barman will use the pg_basebackup command to execute the backup. Global/Server.

backup_options

This option allows you to control the way Barman interacts with PostgreSQL for backups. It is a comma-separated list of values that accepts the following options:

  • exclusive_backup (default when backup_method = rsync): barman backup executes backup operations using the standard exclusive backup approach (technically through pg_start_backup and pg_stop_backup)
  • concurrent_backup (default when backup_method = postgres): if using PostgreSQL 9.2, 9.3, 9.4, and 9.5, Barman requires the pgespresso module to be installed on the PostgreSQL server and can be used to perform a backup from a standby server. Starting from PostgreSQL 9.6, Barman uses the new PostgreSQL API to perform backups from a standby server.
  • external_configuration: if present, any warning regarding external configuration files is suppressed during the execution of a backup.

Note that exclusive_backup and concurrent_backup are mutually exclusive. Global/Server.

bandwidth_limit

This option allows you to specify a maximum transfer rate in kilobytes per second. A value of zero specifies no limit (default). Global/Server.

barman_home

Main data directory for Barman. Global.

barman_lock_directory

Directory for locks. Default: %(barman_home)s. Global.

basebackups_directory

Directory where base backups will be placed. Server.

basebackup_retry_sleep

Number of seconds of wait after a failed copy, before retrying Used during both backup and recovery operations. Positive integer, default 30. Global/Server.

basebackup_retry_times

Number of retries of base backup copy, after an error. Used during both backup and recovery operations. Positive integer, default 0. Global/Server.

check_timeout

Maximum execution time, in seconds per server, for a barman check command. Set to 0 to disable the timeout. Positive integer, default 30. Global/Server.

compression

Standard compression algorithm applied to WAL files. Possible values are: gzip (requires gzip to be installed on the system), bzip2 (requires bzip2), pigz (requires pigz), pygzip (Python’s internal gzip compressor) and pybzip2 (Python’s internal bzip2 compressor). Global/Server.

conninfo

Connection string used by Barman to connect to the Postgres server. This is a libpq connection string, consult the PostgreSQL manual for more information. Commonly used keys are: host, hostaddr, port, dbname, user, password. Server.

custom_compression_filter

Customised compression algorithm applied to WAL files. Global/Server.

custom_decompression_filter

Customised decompression algorithm applied to compressed WAL files; this must match the compression algorithm. Global/Server.

description

A human readable description of a server. Server.

errors_directory

Directory that contains WAL files that contain an error; usually this is related to a conflict with an existing WAL file (e.g. a WAL file that has been archived after a streamed one).

immediate_checkpoint

This option allows you to control the way PostgreSQL handles checkpoint at the start of the backup. If set to false (default), the I/O workload for the checkpoint will be limited, according to the checkpoint_completion_target setting on the PostgreSQL server. If set to true, an immediate checkpoint will be requested, meaning that PostgreSQL will complete the checkpoint as soon as possible. Global/Server.

incoming_wals_directory

Directory where incoming WAL files are archived into. Requires archiver to be enabled. Server.

last_backup_maximum_age

This option identifies a time frame that must contain the latest backup. If the latest backup is older than the time frame, barman check command will report an error to the user. If empty (default), latest backup is always considered valid. Syntax for this option is: “i (DAYS | WEEKS | MONTHS)” where i is a integer greater than zero, representing the number of days | weeks | months of the time frame. Global/Server.

log_file

Location of Barman’s log file. Global.

log_level

Level of logging (DEBUG, INFO, WARNING, ERROR, CRITICAL). Global.

max_incoming_wals_queue

Maximum number of WAL files in the incoming queue (in both streaming and archiving pools) that are allowed before barman check returns an error (that does not block backups). Global/Server. Default: None (disabled).

minimum_redundancy

Minimum number of backups to be retained. Default 0. Global/Server.

network_compression

This option allows you to enable data compression for network transfers. If set to false (default), no compression is used. If set to true, compression is enabled, reducing network usage. Global/Server.

parallel_jobs

This option controls how many parallel workers will copy files during a backup or recovery command. Default 1. Global/Server. For backup purposes, it works only when backup_method is rsync.

path_prefix

One or more absolute paths, separated by colon, where Barman looks for executable files. The paths specified in path_prefix are tried before the ones specified in PATH environment variable. Global/server.

post_archive_retry_script

Hook script launched after a WAL file is archived by maintenance. Being this a retry hook script, Barman will retry the execution of the script until this either returns a SUCCESS (0), an ABORT_CONTINUE (62) or an ABORT_STOP (63) code. In a post archive scenario, ABORT_STOP has currently the same effects as ABORT_CONTINUE. Global/Server.

post_archive_script

Hook script launched after a WAL file is archived by maintenance, after ‘post_archive_retry_script’. Global/Server.

post_backup_retry_script

Hook script launched after a base backup. Being this a retry hook script, Barman will retry the execution of the script until this either returns a SUCCESS (0), an ABORT_CONTINUE (62) or an ABORT_STOP (63) code. In a post backup scenario, ABORT_STOP has currently the same effects as ABORT_CONTINUE. Global/Server.

post_backup_script

Hook script launched after a base backup, after ‘post_backup_retry_script’. Global/Server.

pre_archive_retry_script

Hook script launched before a WAL file is archived by maintenance, after ‘pre_archive_script’. Being this a retry hook script, Barman will retry the execution of the script until this either returns a SUCCESS (0), an ABORT_CONTINUE (62) or an ABORT_STOP (63) code. Returning ABORT_STOP will propagate the failure at a higher level and interrupt the WAL archiving operation. Global/Server.

pre_archive_script

Hook script launched before a WAL file is archived by maintenance. Global/Server.

pre_backup_retry_script

Hook script launched before a base backup, after ‘pre_backup_script’. Being this a retry hook script, Barman will retry the execution of the script until this either returns a SUCCESS (0), an ABORT_CONTINUE (62) or an ABORT_STOP (63) code. Returning ABORT_STOP will propagate the failure at a higher level and interrupt the backup operation. Global/Server.

pre_backup_script

Hook script launched before a base backup. Global/Server.

recovery_options

Options for recovery operations. Currently only supports get-wal. get-wal activates generation of a basic restore_command in the resulting recovery.conf file that uses the barman get-wal command to fetch WAL files directly from Barman’s archive of WALs. Comma separated list of values, default empty. Global/Server.

retention_policy

Policy for retention of periodic backups and archive logs. If left empty, retention policies are not enforced. For redundancy based retention policy use “REDUNDANCY i” (where i is an integer > 0 and defines the number of backups to retain). For recovery window retention policy use “RECOVERY WINDOW OF i DAYS” or “RECOVERY WINDOW OF i WEEKS” or “RECOVERY WINDOW OF i MONTHS” where i is a positive integer representing, specifically, the number of days, weeks or months to retain your backups. For more detailed information, refer to the official documentation. Default value is empty. Global/Server.

retention_policy_mode

Currently only “auto” is implemented. Global/Server.

reuse_backup

This option controls incremental backup support. Global/Server. Possible values are: * off: disabled (default); * copy: reuse the last available backup for a server and create a copy of the unchanged files (reduce backup time); * link: reuse the last available backup for a server and create a hard link of the unchanged files (reduce backup time and space). Requires operating system and file system support for hard links.

slot_name

Physical replication slot to be used by the receive-wal command when streaming_archiver is set to on. Requires PostgreSQL >= 9.4. Global/Server. Default: None (disabled).

streaming_archiver

This option allows you to use the PostgreSQL’s streaming protocol to receive transaction logs from a server. If set to on, Barman expects to find pg_receivexlog in the PATH (see path_prefix option) and that streaming connection for the server is working. This activates connection checks as well as management (including compression) of WAL files. If set to off (default) barman will rely only on continuous archiving for a server WAL archive operations, eventually terminating any running pg_receivexlog for the server. Global/Server.

streaming_archiver_batch_size

This option allows you to activate batch processing of WAL files for the streaming_archiver process, by setting it to a value > 0. Otherwise, the traditional unlimited processing of the WAL queue is enabled. When batch processing is activated, the archive-wal process would limit itself to maximum streaming_archiver_batch_size WAL segments per single run. Integer. Global/Server.

streaming_archiver_name

Identifier to be used as application_name by the receive-wal command. Only available with pg_receivexlog >= 9.3. By default it is set to barman_receive_wal. Global/Server.

streaming_backup_name

Identifier to be used as application_name by the pg_basebackup command. Only available with pg_basebackup >= 9.3. By default it is set to barman_streaming_backup. Global/Server.

streaming_conninfo

Connection string used by Barman to connect to the Postgres server via streaming replication protocol. By default it is set to conninfo. Server.

streaming_wals_directory

Directory where WAL files are streamed from the PostgreSQL server to Barman. Requires streaming_archiver to be enabled. Server.

ssh_command

Command used by Barman to login to the Postgres server via ssh. Server.

tablespace_bandwidth_limit

This option allows you to specify a maximum transfer rate in kilobytes per second, by specifying a comma separated list of tablespaces (pairs TBNAME:BWLIMIT). A value of zero specifies no limit (default). Global/Server.

wal_retention_policy

Policy for retention of archive logs (WAL files). Currently only “MAIN” is available. Global/Server.

wals_directory

Directory which contains WAL files. Server.

HOOK SCRIPTS

The script definition is passed to a shell and can return any exit code.

The shell environment will contain the following variables:

BARMAN_CONFIGURATION

configuration file used by barman

BARMAN_ERROR

error message, if any (only for the ‘post’ phase)

BARMAN_PHASE

‘pre’ or ‘post’

BARMAN_RETRY

1 if it is a retry script (from 1.5.0), 0 if not

BARMAN_SERVER

name of the server

Backup scripts specific variables:

BARMAN_BACKUP_DIR

backup destination directory

BARMAN_BACKUP_ID

ID of the backup

BARMAN_PREVIOUS_ID

ID of the previous backup (if present)

BARMAN_STATUS

status of the backup

BARMAN_VERSION

version of Barman

Archive scripts specific variables:

BARMAN_SEGMENT

name of the WAL file

BARMAN_FILE

full path of the WAL file

BARMAN_SIZE

size of the WAL file

BARMAN_TIMESTAMP

WAL file timestamp

BARMAN_COMPRESSION

type of compression used for the WAL file

Only in case of retry hook scripts, the exit code of the script is checked by Barman. Output of hook scripts is simply written in the log file.

EXAMPLE

Here is an example of configuration file:

[barman]
; Main directory
barman_home = /var/lib/barman

; System user
barman_user = barman

; Log location
log_file = /var/log/barman/barman.log

; Default compression level
;compression = gzip

; Incremental backup
reuse_backup = link

; 'main' PostgreSQL Server configuration
[main]
; Human readable description
description =  "Main PostgreSQL Database"

; SSH options
ssh_command = ssh postgres@pg

; PostgreSQL connection string
conninfo = host=pg user=postgres

; PostgreSQL streaming connection string
streaming_conninfo = host=pg user=postgres

; Minimum number of required backups (redundancy)
minimum_redundancy = 1

; Retention policy (based on redundancy)
retention_policy = REDUNDANCY 2

SEE ALSO

barman (1).

AUTHORS

In alphabetical order:

  • Gabriele Bartolini (architect)
  • Jonathan Battiato (QA/testing)
  • Giulio Calacoci (developer)
  • Francesco Canovai (QA/testing)
  • Leonardo Cecchi (developer)
  • Gianni Ciolli (QA/testing)
  • Britt Cole (documentation)
  • Marco Nenciarini (project leader)
  • Rubens Souza (QA/testing)

Past contributors:

  • Carlo Ascani
  • Stefano Bianucci
  • Giuseppe Broccolo

RESOURCES

COPYING

Barman is the property of 2ndQuadrant Limited and its code is distributed under GNU General Public License v3.

Copyright (C) 2011-2017 2ndQuadrant Limited - https://www.2ndQuadrant.com/.